3M™ Double Coated Tape 9495LE

Details

Highlights

• Adds dimensional stability to foams and other substrates and also makes it easier to handle the tape during slitting and die-cutting

• 3M™ Double Coated Tape 9495LE features a single liner for ease in selective die cutting

• The bond strength of 3M™ Laminating Adhesive 300LSE increases as a function of time and temperature, and has very high initial adhesion

• High bonding strength to LSE plastics

• Film carrier adding dimensional stability to foams and other substrates

• Film carrier makes for easy handling during slitting and die-cutting

3M™ Double Coated Tape 9495LE provides high bond strength to most surfaces, including many low surface energy plastics such as polypropylene and powder coated paints. The acrylic adhesive also provides excellent adhesion to surfaces contaminated lightly with oil typically used with machine parts.

3M™ Double Coated Tape 9495LE is a 6.7 mil thick, clear tape that provides high bond strength to most surfaces, including many low surface energy (LSE) plastics such as polypropylene and powder coated paints. Use on low surface energy surfaces and as plastic extrusion attachment. It also improves handling and ease of die-cutting.

Recommended Applications

• Foam to powder coated painted surfaces

• Low surface energy plastic adhesion

• Lens bonding applications

• Logo bonding‎

• Touchpad bracket assembly

• Battery bonding‎

• Low surface energy bonding

• Memory card bonding

• Case assembly‎

• Camera module assembly

• Bezel bonding‎

• Display bonding

• Cover lens bonding‎

• Electronic component bonding‎

• Module bonding to PET card

• Battery door attachment‎

• Speaker module assembly

• Electrical insulation bonding

• Touchpad assembly

• Touch panel bonding‎

• Rubber feet bonding‎

Coats on Both
In general, double coated tape is composed of a paper, film or tissue carrier that is coated on both sides with pressure sensitive adhesive. The adhesive is protected by a peel-away liner that can be removed at the time of application or left in place until the joining surfaces are ready to be attached. These tapes can be applied by hand or with a dispenser. Double coated tape dispensers are available in a variety of configurations ranging from manual to fully automatic. Applications for double coated tape are found in construction, fabrication, arts and hobbies.

Typical properties

Details

Adhesive Type	Low Surface Energy Acrylic Adhesive 300LSE
Back Side Adhesive Thickness (Imperial)	3.4 mil
Back Side Adhesive Thickness (Metric)	0.086 mm
Back Side Adhesive Type	Low Surface Energy Acrylic Adhesive 300LSE
Backing (Carrier) Material	PET
Backing (Carrier) Thickness (Imperial)	0.5 mil
Backing (Carrier) Thickness (Metric)	0.013 mm
Brands	3M™
Face Side Adhesive Thickness (Imperial)	2.8 mil
Face Side Adhesive Thickness (Metric)	0.071 mm
Face Side Adhesive Type	Low Surface Energy Acrylic Adhesive 300LSE
Factory ISO Certification	No ISO Certification information available
Industries	Electronics, General Industrial
Maximum Operating Temperature (Celsius)	149 ℃
Minimum Operating Temperature (Celsius)	-40 ℃
Primary Liner	58# Polycoated Kraft Paper (PCK)
Primary Liner Color	Tan
Primary Liner Thickness (Imperial)	4.2 mil
Primary Liner Thickness (Metric)	0.11 mm
Product Color	Transparent
Total Tape Thickness without Liner (Imperial)	6.7 mil
Total Tape Thickness without Liner (Metric)	0.17 mm
eClass 14 Classification Group	23330213

Dimensions and Classifications

Overall Length (Imperial)	50 yd, 60 yd, 180 yd, 320 yd, 360 yd
Overall Length (Metric)	45.72 m, 54.86 m, 54.864 m, 164.59 m, 292.608 m, 329.18 m
Overall Width (Imperial)	0.75 in, 0.875 in, 1 in, 1.5 in, 3 in, 6 in, 27 in, 54 in
Overall Width (Metric)	19.05 mm, 22.23 mm, 25.4 mm, 38.1 mm, 76.2 mm, 152.4 mm, 685.8 mm, 1371.6 mm